Fixed Ball End
Inserts through a drill hole or slot in the end post and secures with a screw-on ball. Ball pivots to allow angled terminations without beveled washers. Typically paired with Ball End Turnbuckle or Sleekline Ball End Turnbuckle.

Part#	Swage	CableØ	Thread	DØ	L	*DrillØ
3352	M	1/8"	1/4-28RH	5/8"	1-1/4"	5/16"
3353	M	3/16"	1/4-28RH	5/8"	1-3/4"	3/8"
3354	M	1/4"	5/16-24RH	5/8"	2"	7/16"
3355	C	1/8"	1/4-28RH	5/8"	1-7/8"	5/16"
3356	C	3/16"	1/4-28RH	5/8"	2-1/4"	3/8"

M=Machine Swage, C=CableCrimp™ Hand Swage

*Ball can be slightly recessed into the post by counterboring with a 9/16" drill.

DrillØ is the recommended drill hole size for attaching fittings to end posts. Drill hole diameters for the intermediate posts may be different than the fitting attachment posts; please call our sales department at 707-731-2581 to confirm proper hole sizes.

To minimize cable deflection, each cable, when properly installed, will have a tension load of at least 300 lbs. Therefore, it's important that frames are designed and built strong enough to support these loads. Review Frame Requirement Detail to help you prepare the railing for cable infill.

We strongly advise against exceeding a 3-inch cable spacing.

We recommend having a post or vertical member (intermediate picket) at least every 3 feet.

Give us a call if you need assistance, 707-731-2581.